@vladimir Hi Vladimir, thanks for this, we'll try it out. Brett

From the flat file, we would be able to build the simulation data source.

We wish to be able to capture a trace of characters from a customer device which will be connected to our controller, and then using our test harness, play them back into our controller to be able to regression test software changes and simulate real life situations. Some of the customer equipment is very large, some expensive and some simply one off builds - most are remote and cant be taken offline - which makes it hard to regression test software changes at our end without simulation capability. Play back doesnt need to e perfect timing wise so data block granularity is fine. It would be nice to output the capture to a flat file with ascii or hex and appropriate timestamps where blocks start and/or end.

Hi

Is there a way of reporting timestamp for each character received or displaying a line terminated by CR and reporting the timestamp of the end of line, rather than hex line of 16? We tried setting the line length to 1 but the minimum seems to be 4 in hex, and 8 in plain text.

We have a feed from a serial source with variable length messages terminated by CR and I need to be able to determine the time received for each line. (EOL specifically). Ideally I could then export them to a file so our software could read that and we can use it to replay the feed in our test simulation software.

Thanks
Brett

Hi. I just upgraded IONinja software because the application prompted me that there was a new update that I should install. It then required me to create a login to use the product (which is new).

The original worked fine and had all the features I needed.

Please advise if any of the original features have been removed now that I "upgraded" the software due to license changes and what it will cost to retain those features.

I purchased the IO Ninja "•Serial Tap for IO Ninja - Standard" for $195 on 18 Jul 2019.