Posts made by Bartosz Kozlowski

Hi Vladimir,

thank you for the script, it worked perfectly!

Bartosz.

Hi,

I'm using IO ninja spi tap. I have two chips on one SPI bus (with two separate chip select pins), flash and eeprom. When FLASH chip select is set to HIGH, the sniffer reads bytes from EEPROM at this time, and vice versa, when EEPROM chip select is set to HIGH, I see the bytes sent from FLASH in the log.

Is it possible to set in options or write a script when chip select is on the HIGH level so that the logger does no read data from spi? or filter it out? I've just started using this tool and i'm not yet expert with scripting.

Bartosz.