<![CDATA[simple question-what is "Dual Hex line size"]]>Ops...and a very simple question,
what is the "Dual Hex Line size"? I tried it, and I -very quicly- try to find if there is any place where is described, but I do not find out.
d0477f31-a175-4772-8c72-6a27d7f1dffb-image.png
Thank you, regards!

]]>http://64.23.185.212/forum/topic/320/simple-question-what-is-dual-hex-line-sizeRSS for NodeFri, 17 Apr 2026 16:43:58 GMTSun, 27 Oct 2024 09:14:33 GMT60<![CDATA[Reply to simple question-what is "Dual Hex line size" on Wed, 11 Dec 2024 17:29:46 GMT]]>I cannot tell 100%, because I am not user of SPI/I2C tap, but I agree that it is confusing of the "non-users" of that tap. And I agree about the consistence (and "the right thing").
I also I agree that simplify is usually good so I think that your proposal is perfect
(btw, about simplify, in fact there is a Einstein quote 🙂 : "Everything should be made as simple as possible, but not simpler")
Regards!

]]>http://64.23.185.212/forum/post/727http://64.23.185.212/forum/post/727Wed, 11 Dec 2024 17:29:46 GMT<![CDATA[Reply to simple question-what is "Dual Hex line size" on Wed, 11 Dec 2024 09:35:26 GMT]]>Well, then have to add help tooltips to every other setting, too, for consistency... Which could be the right thing to do, actually 🙂

In this particular case, however, I'm kinda inclined to simplify and drop this setting altogether (use hex-line-size / 2 for this special dual-hex-view mode).

]]>http://64.23.185.212/forum/post/722http://64.23.185.212/forum/post/722Wed, 11 Dec 2024 09:35:26 GMT<![CDATA[Reply to simple question-what is "Dual Hex line size" on Sat, 07 Dec 2024 12:31:06 GMT]]>Ok. Thanks! now clear, but a little confusing indeed 🙂 ... perhaps simply with a hoover tooltip, or other help, would be enough

]]>http://64.23.185.212/forum/post/715http://64.23.185.212/forum/post/715Sat, 07 Dec 2024 12:31:06 GMT<![CDATA[Reply to simple question-what is "Dual Hex line size" on Wed, 27 Nov 2024 06:54:19 GMT]]>This was done for the I2C/SPI Tap. The IO Ninja log engine supports this special dual-hex view for SPI which looks like this:

f807fcd7-5340-4069-b924-0819ad0d07b9-image.png

But I totally see how this could be confusing -- it's only relevant to this single plugin and a single mode in this plugin!

Maybe, we should remove this setting completely and simply calculate it as hex-line-size / 2?

]]>http://64.23.185.212/forum/post/710http://64.23.185.212/forum/post/710Wed, 27 Nov 2024 06:54:19 GMT