<![CDATA[SPI Tap in 3-wire]]>Can the spi interface be used just using 3-wires (cLK, mosi AND mIso). Also if I just want to monitor, how do i turn off outputs on spi signals?

]]>http://64.23.185.212/forum/topic/171/spi-tap-in-3-wireRSS for NodeSat, 05 Sep 2026 21:03:03 GMTMon, 24 Jul 2023 16:23:34 GMT60<![CDATA[Reply to SPI Tap in 3-wire on Wed, 02 Aug 2023 07:09:32 GMT]]>Hello Noe,

Apologies for the delayed response. Yes, CS(SS) is not required, CLK/MOSI/MISO lines are enough. Also, I2C/SPI Tap is a passive sniffer device, it never drives the lines.

]]>http://64.23.185.212/forum/post/445http://64.23.185.212/forum/post/445Wed, 02 Aug 2023 07:09:32 GMT