Specifications

Top Previous Next

I2C/SPI Tap is supplied with a USB cable.

Hardware specifications

USB port	USB 2.0, high-speed (480MHz), USB-C connector
Supported I2C clock speeds	Up to 700KHz
Supported SPI clock speeds	Up to 24MHz [Note 1]
Operating temperature	0 to +60 degrees C
Operating relative humidity	10-90%
Mechanical dimensions	82 x 74 x 30 mm

Note 1

This number depends on the host PC's performance and its "workload." Captured data may be lost if PC's USB channel is unable to receive it in a timely manner. Our tests have shown that an average i7-based desktop PC (that is not performing other time-critical tasks) easily captures sustained SPI traffic with clock speeds up to 24MHz.

All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this Manual and does not make any commitment to update the information contained herein.

Is the data you are looking for missing from the above table? Do not just assume that you know the answer — talk to Tibbo! Remember, that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our Customer.