Specifications

Top Previous Next

Ethernet Tap is supplied with a USB cable.

Hardware specifications

USB port	USB 2.0, high-speed (480MHz), USB-C connector
Throughput	Up to 100BaseT Ethernet's real-life throughput [Note 1] [Note 2]
Operating temperature	0 to +60 degrees C
Operating relative humidity	10-90%
Mechanical dimensions	82 x 74 x 30 mm

Note 1

As long as your PC is fast enough to receive all the captured data. Some data may be lost if a PC's USB channel is unable to receive it on time. Our tests have shown that an average i7-based desktop PC (that is not performing other time-critical tasks) easily captures 100BaseT traffic even under high Ethernet load conditions.

Note 2

The Tap does not allow mixing 10BaseT and 100BaseT cables. Both sides of the Tap must have the same connection speed. That means that you may not connect one side of the Tap to a 100Base-T device, and another side—to a 10Base-T device.

All specifications are subject to change without notice and are for reference only. Tibbo assumes no responsibility for any errors in this Manual and does not make any commitment to update the information contained herein.

Is the data you are looking for missing from the above table? Do not just assume that you know the answer — talk to Tibbo! Remember, that the ultimate responsibility for all decisions you make regarding the use and the mode of use of Tibbo products lies with you, our Customer.